Friday, December 18, 2009 at 3:34 PM | 0 comments  

The Network Layer is Layer 3 of the seven-layer OSI model of computer networking.

The Network Layer is responsible for end-to-end (source to destination) packet delivery including routing through intermediate hosts, whereas the Data Link Layer is responsible for node-to-node (hop-to-hop) frame delivery on the same link.

The Network Layer provides the functional and procedural means of transferring variable length data sequences from a source to a destination host via one or more networks while maintaining the quality of service and error control functions.

Functions of the Network Layer include:

For example, snail mail is connectionless, in that a letter can travel from a sender to a recipient without the recipient having to do anything. On the other hand, the telephone system is connection-oriented, because the other party is required to pick up the phone before communication can be established. The OSI Network Layer protocol can be either connection-oriented, or connectionless. In contrast, the TCP/IP Internet Layer supports only the connectionless Internet Protocol (IP); but connection-oriented protocols exist higher at other layers of that model.
  • Host addressing
Every host in the network needs to have a unique address which determines where it is. This address will normally be assigned from a hierarchical system, so you can be "Fred Murphy" to people in your house, "Fred Murphy, Main Street 1" to Dubliners, or "Fred Murphy, Main Street 1, Dublin" to people in Ireland, or "Fred Murphy, Main Street 1, Dublin, Ireland" to people anywhere in the world. On the Internet, addresses are known as Internet Protocol (IP) addresses.
  • Message forwarding
Since many networks are partitioned into subnetworks and connect to other networks for wide-area communications, networks use specialized hosts, called gateways or routers to forward packets between networks. This is also of interest to mobile applications, where a user may move from one location to another, and it must be arranged that his messages follow him. Version 4 of the Internet Protocol (IPv4) was not designed with this feature in mind, although mobility extensions exist. IPv6 has a better designed solution.

Within the service layering semantics of the OSI network architecture the Network Layer responds to service requests from the Transport Layer and issues service requests to the Data Link Layer.

Posted by GoemilareSKom Labels:
Forwarding allows the network packets on one network interface (i.e. eth0) to be forwarded to another network interface (i.e. eth1). This will allow the Linux computer to conect ("ethernet bridge") or route network traffic.

The bridge configuration will merge two (or several) networks into one single network topology. IpTables firewall rules can be used to filter traffic.

A router configuration can support multicast and basic IP routing using the "route" command. IP masquerading (NAT) can be used to connect private local area networks (LAN) to the internet or load balance servers.

  • Turn on IP forwarding to allow Linux computer to act as a gateway or router.
    echo 1 > /proc/sys/net/ipv4/ip_forward
    Default is 0. One can add firewall rules by using ipchains.

    Another method is to alter the Linux kernel config file: /etc/sysctl.conf Set the following value:

    net.ipv4.ip_forward = 1

    See file /etc/sysconfig/network for storing this configuration.

    FORWARD_IPV4=true
    Change the default "false" to "true".

All methods will result in a proc file value of "1". Test: cat /proc/sys/net/ipv4/ip_forward

The TCP Man page - Linux Programmer's Manual and /usr/src/linux/Documentation/proc.txt (Kernel 2.2 RH 7.0-) cover /proc/sys/net/ipv4/* file descriptions.

Posted by GoemilareSKom

Silahkan isi buku tamu'y ya...

Visit the Site
MARVEL and SPIDER-MAN: TM & 2007 Marvel Characters, Inc. Motion Picture © 2007 Columbia Pictures Industries, Inc. All Rights Reserved. 2007 Sony Pictures Digital Inc. All rights reserved. blogger templates